To search for Batsense, tap on the ‘Discover Batsense’ button in the app. Make sure the Batsense is properly charged and Bluetooth of the mobile device is switched ON.
Once Batsense is visible in the search list, tap on ‘Register’ button.
Connect Sensor :
After registering the Batsense in Smartcricket app, tap on Batsense from the list, go to Batsense settings and tap on ‘Connect’ button at the bottom of the page. Batsense will show permission box to pair with mobile device. Please allow the pairing.
When starting a “session’, App will prompt to ‘Calibrate’ the Batsense if its not calibrated before. Follow the instructions to Calibrate the sensor.
Once calibration is complete, Start the Session to get the shots recorded.
Once you are done playing, Stop the Session by going to Batsense details page.
Additionally, once you are done playing, Stop the ‘Match Mode’ session & tap on ‘Sync’ button to Sync all the shots from Batsense to Smartcricket app.
How to Turn Off Batsense:
It is important to Turn Off the Batsense to save the battery and prevent automatic syncing. Press and hold the Power button on top of the Sensor for 4 secs and release. You will see the LED light turning off slowly.
View Live Shots:
During the session to see Live shots:
1. Go to Dashboard & then to ‘3D Shot Analysis’.
2. Play the shot and check the recording.
View old shots for analysis :
To do Shot Analysis, go to ‘Calendar’ from footer and select the circled date where you played the session. From the list of sessions, select any session to view them for analysis.
LED first shows the connection status followed by battery status.
White : Not Connected. Blue : Connected
Green : Charge more than 80% Amber : Charge between 20% to 80% Red : Charge below 20%
LED Indication - Session Status:
* 3 Blue Blinks followed by Battery status – Connected but ‘Not in Session’
* 1 Blue Blink followed by Battery status – Connected and ‘In-Session’